SMT / PCB CONTRACT MANUFACTURER (#19) 04/11/2017 1:00 AM EDT - 04/18/2017 1:00 AM EDT Closed
Starts Ending 04/18/2017 1:00 AM EDT

Auction Info

Sale closed

View all lots

Bidding Closed

Due to the Winding Down of Operations

SMT / PCB CONTRACT MANUFACTURER

Tuesday, April 18, 2017

(3) SMT Assembly Lines, Test Equipment, Inventory, Machine Shop, Plant Support & More

DATETuesday, April 18, 2017

TIME10:30am (CT)

View & Bid

Email Us

...

HIGHLIGHTS:

McDonald Technologies was a full service EMS manufacturing company providing electronic system design, multi layer printed circuit board assembly, embedded O/S services, test / burn-in capabilities, complex wiring harnesses production, and prototype design. Complete production lines as well as unique support equipment and tools could allow you to provide the same vital services to your customers. This is a great opportunity to expand SMT manufacturing, develop a prototype department, increase warehouse & office equipment or purchase electronic components inventory at a substantial cost savings.

SMT & PCB ASSEMBLY EQUIPMENT

DEK Horizon Auto Paste Dispenser, DEK MPM 3000 Automated Solder Paste Application, Universal Radial 5 Auto Insertion, Universal Model 6287 AXIAL Insertion Machine, (2) Fuji CP643E Chip Shooter, Fuji CP IV-2 High Speed Chip Placer, Fuji IP-II Dual Head Chip Placer, Fuji IP-III Dual Head Chip Placer, Radial Lead Sequence Inserter Model 6348A, Electrovert Automated PCB Wave Solder System, Sniper II SMD-7007-5001 Flo-Master, PVA 650 Conformal Coating System, Acculogic Sprint FLS4510 Flying Probe Tester, Electrovert OmniFlo7 Reflow Oven, Electrovert Bravo 8105 Reflow Oven, Selective Soldering RPS Automation Rhythm, Stoelting Aqueous CBW-218 Automated PCB Wash System, Kutrite MCS-135BC Measure Cut & Strip Large Wire Process Machine, Schleunginer CS-9100 Cut & Strip Machine, Artos-CS-600 Wire Cutter & Stripper, Sniper II SMT/BGA/Chip Scale Placement and Rework System, Conformal Coatings Operations w/ Spray Booth, Coil Winding Systems for Solenoids & Electromechanical Devices, Vulcanizing, Molding, and Potting Systems, Pressing Stations and Much More…

QC, TESTING & SUPPORT EQUIPMENT

VisionMaster 400 Automated Laser Solder Inspection System, HASS TC-9 Temperature Test Chamber, MIRTEC AOI Machine MV-3 Series, Teradyne Z1890 Circuit Tester, Teradyne Z1880 Circuit Tester, Nicolet NXR-1400i X-Ray System, Cable/Harness Testing System, Matheson Tri-Gas Environmental Testing Systems, Soldering Stations, Mantis Scopes, Oscilloscopes, Function Generators, Multimeters, Attenuators, Analyzers, Inspection Tables/Lights, Temperature Controllers, Power Supplies, Hand Tools Plus Much More…

MACHINE SHOP

Complete Machine Shop with Milling, Turning, & Grinding Capabilities includes Enco Manufacturing X6323 Vertical Mill, Equitop ESG-618M Conventional Surface Grinder, Alliant 1 1/2 TMV Vertical Mill, Shark Metal Mover 17 X 33 Lathe and Much More…

PLANT SUPPORT

Air Compressors, Vacuum Pumps, Forklifts, Manlifts, Pallet Jacks, Hand Trucks, Assembly Tables, Rolling Ladders, Shop Fans, Wire Utility Carts, Pallet Racking and Much More…

OFFICE FURNITURE & APPLIANCES

Executive Desks, Chairs, Conference Tables, Office Panel Systems, File Cabinets, Computers, Printers, Bizhub 601 Copier, Projectors, and Much More...

INVENTORY

$2MM Inventory of Electronic Equipment Including Antennas, Batteries, Boot Adapters, Buffers, Capacitors, CMOS, Connectors, Contacts, Crystals, Filters, Flashes, Grommets, Headers, Heatsinks, ICs, Inductors, Labels, LEDs, Micro Controllers, Modems, MSOPs, Oscillators, Plugs, Power Supplies, Processors, Proximity Sensors, Reed Switches, Resistors, Sensors, Sockets, Speakers, Switches, Transformers, Transistors, XCVRs, XTALs and Much More.

By 3M, Alpha, AMP, Tyco TE, AVX, Brady, Cornel, Cypress Electronics, Dallas Semi Conductor, Linear Technology, Molex, Motorola, Panasonic, Pioneer and Many Others.

LOCATIONS:

2310 McDaniel Dr.
Carrollton, TX 75006

Preview:
Mon, Apr 17 from 10am to 4pm (CT)

Checkout:
Thu - Tue, Apr 20 - 25 from 8am to 4pm (CT)
**Checkout is By Appointment Only**
**All Small Items & Office Furniture Must Be Removed by 4/22**

HOW TO BUY:

STEP 1 - REGISTER

Click the ‘Register to Bid” link above and complete the registration form - your bidder number will be emailed to you for use at this and future auctions. Please be certain to review the General Terms of Sale, along with any Sale Specific Terms before registering.

You must provide a credit card, which will be authorized for $300 to secure your bids; Please note that your card must have sufficient credit to be authorized for 25% of your purchases as you continue to bid. If you plan on spending more than $10,000 please contact the Auctioneer prior to the auction to ensure no bidding interruption.

$5000 minimum deposit is required prior to the auction for international bidders. Auctioneer may not be able to respond timely to registration requests on the day of sale, we recommend registering the day prior to the auction.

All deposits made by cashiers check, wire transfer or firm and personal check accompanied with a bank letter of guarantee will be returned within 7 days unless purchases are made.

STEP 2 – VIEW ITEMS

- Click on the ‘View Items & Bid’ link above to browse the auction catalog.
- Search by Keywords at the top of any bidding page.
- Click ‘refresh’ to see the current status of each item.
- Click on “Items Still Open for Bidding” to clear sold items from your screen and see only those items still available (this applies during the auction closings).

STEP 3 – BID

Enter a maximum of what you are willing to pay under “Your Maximum” - The system will start your bid at the lowest available increment and bid for you.
Then scroll to the bottom of the page, enter your Bid Number and Password and click ‘Submit Bids’
(PLEASE NOTE: You will be asked to confirm your bids)
Important Bidding Notes:
- Items will close at a rate of 2-4 items every minute (varies by auction).
- An item’s closing time will extend by 4 minutes when bidding occurs within the final 4 minutes of its scheduled closing.
- If you submit a bid prior to the auction you will be notified if you are out bid.
- You may enter multiple bids on a page before clicking ‘Submit Bids’; however, changing pages will clear your bids.

STEP 4 - PAY

Credit Cards on file will be charged at the end of the Sale plus 18% buyers premium and Sales Tax unless you are purchasing for resale and have completed and returned a resale certificate before the conclusion of the auction. Balances in excess of $10,000 must be settled by cashiers’ check or wire transfer received by Tiger by 12:00 pm the day following the auction.

STEP 5 - PICKUP

You are responsible to remove your items during the posted checkout times. If you are purchasing from out of the area, you may send a 3rd party shipping company to remove your items. Bring your own crews, packing materials, material handling equipment, etc. for removal. Appointments are mandatory. Be sure to email your preferred pickup time within the posted schedule after you have won your last auction item.

TERMS:

The following highlights key sale terms and identifies sale specific terms. These, along with our General Terms of Sale, comprise the Complete Terms of Sale. Please review the following and download the General Terms of Sale here to confirm the responsibilities you are agreeing to upon participating in this sale.

TERMS AT-A-GLANCE

DEPOSITS: We will authorize your credit card for $300 as an Auction Registration deposit, and reserve the right to increase the deposit to equal 25% of your total high bids. This authorization will place a 3-7 day hold on these funds with your credit card company, but will not be charged unless purchases are made.

All deposits made by cashiers check, wire transfer or firm and personal check accompanied with a bank letter of guarantee will be returned within 7 days unless purchases are made.

PAYMENT DEADLINE: All payments are due by 12 pm the day after the auction closes.

PAYMENT FORMS: Credit cards on file will be charged upon the completion of the sale. You may pay by cashiers check or wire transfer by (a) notifying Tiger prior to the close of auction, AND (b) submitting payment in time for Tiger to receive it no later than 12pm the day following the auction.

PURCHASES OVER $10,000: Balances in excess of $10,000 must be settled by cashiers’ check or wire transfer received by Tiger no later than 12pm the day following the auction.

BUYERS’ PREMIUM: A 18% Buyer’s Premium will be added to the price of each item.

SALES TAX: All Taxes are applied at the end of the auction unless a reseller has notified Tiger prior to the close of auction and qualifies for sales tax exemption. A buyer’s failure to qualify for exemption does not waive its obligations to complete its purchase per the terms of sale.

REMOVAL: All buyers are responsible to remove their items during the posted checkout times. To minimize wait time, all buyers are asked to schedule an appointment. Buyers are also responsible to bring their own crews, packing materials, material handling equipment & etc. for removal. Buyers requiring shipping or moving assistance can refer to our list of 3rd party shippers. See link above.

ALL SALES ARE FINAL: All items are sold “as-is, where-is” with no guarantees or representations. All Sales Are Final. Buyers are recommended to inspect items before they bid.

ALL ITEMS SUBJECT TO PRIOR SALE

Auctioneer has the right to add or delete lots for the sale at any time as well as to cancel the sale entirely or sell in bulk.